Airbus is committed to providing reasonable accommodations as an Equal Opportunity Employer to applicants with disabilities. If you require assistance or an accommodation to complete your application, please contact us at USCareers&64;airbus.com

• Notice: Know Your Rights: Workplace Discrimination is Illegal
• Notice: Pay Transparency Nondiscrimination (English)
• Aviso: Transparencia en el Pago No Discriminación (Spanish)

Job Description:

Satair is looking for a Quality Inspector to join our team based in Dulles, VA.

This position is a temporary (contract) position with no specific time period but could be extended or shortened as needed. Contractors are employed by a 3rd party vendor and placed on assignment to Airbus in America.

You will be part of the team to perform receipt and evaluation inspections of complex components and assemblies using pre-set inspection plans. You will also ensure compliance with all associated quality procedures, airworthiness control plans, and quality management system requirements.

Your working environment:

Located minutes away from the Washington Dulles International Airport, and approximately 30 miles from the U.S. Capitol, this site serves as our major parts distribution hub in the Americas. The facility is a 24/7 fulfillment center, with an Aircraft on Ground (AOG) support desk, and Quality Assurance (QA) operations. To best support our customers, our 20,000-square-foot warehouse features a brand new technology called Autostore, aiming at increasing productivity.

At Airbus, we support you to work, connect and collaborate more easily and accessibly. Wherever possible, we foster flexible working arrangements to stimulate innovative thinking.

Your challenges:

Primary Responsibilities: 

1. Material Inspections: 75

• Using existing aerospace knowledge and expertise to inspect varieties of finished articles to ensure conformance with FAA/EASA/TCCA Part 21 specifications and established quality standards, including customer requirements

• Maintain material batch and manufacturer traceability information

• Issue Discrepancy Reports and Unserviceable Tags on non-conforming material. 

• Monitor and follow up of storage conditions on all Spares material and initiate and perform required actions 

• Assist in the resolution of customer complaints and follow up with the Customer Service team to ensure correct handling and closure of the claim

• Assist in the resolution of supplier non-conformities and follow up with the Supply Chain team and the suppliers to ensure correct handling and closure of the supplier discrepancies

• Oversee non-conforming material handling and disposition of material

• Handling quality escape notifications and perform required actions

• Work with the Quality Department to ensure all documentation, calibrated tools, precision tools and equipment are in accordance with all applicable standards

• Accept the responsibility for a rotating 24-hour “On-Call” shift schedule.

2. Records Traceability: 15

• Maintain required documentation

• Maintain material batch and manufacturer traceability information.

• Document and record non-conformance process issues concerning business operations

3. Other duties as assigned: 10     

• Actively participate and contribute to the continuous improvement for quality related topics, i.e. performing root cause analysis, identifying potential for improvement, implementing improvement ideas, etc.. 

• Interface with Satair’s Material Logistics and Suppliers in the process of reporting, investigating and resolving material non-conformances and quality issues

• Interface with SAP Key User regarding electronic data processing functions and systems support for Quality Management functions/operation.

• Represent the Quality Management Department during internal meetings

• Assist other employees with their questions and issues related to quality management criteria

Your boarding pass:

Qualified Experience and Training:  

Education:

• A high school diploma

Experience:

• A minimum of 1-3 years of maintenance experience and knowledge of aircraft operations, systems and practices OR 1-3 years of manufacturing experience under one of the following: FAA FAR Part 21, EASA Part 21G TCCA Part 21 or aviation distributor

• Familiarization with aerospace quality control and quality assurance systems

• Familiarization with AS9100 / AS9110 / AS9120

• Familiarization with First Article Inspection

• Familiarization with the use of tooling to make airworthiness determinations such as Calipers, micrometers, depth gages

Physical Requirements:

• Applicant must have ability for lifting and carrying up to 30 lbs. / 14 kg., pushing/pulling, sitting, standing, squatting/kneeling, walking, speaking, hearing, vision, and manual dexterity 100 of the time

• On-Site: 100

• Vision: Able to see and read computer screen and other electronic equipment with screens, able to read documents, reports and applicable technical data

• Hearing: Able to hear to participate in conversations in person and via teleconference or phone and to hear sounds on the production floor including safety warnings or alarms

• Speaking: Able to speak in conversations and meetings, deliver information and participate in communications.

• Equipment Operation (personal computer, telephone, copies, fax machine, and related office equipment and using electronic identification card to enter building floors and internal doors): Able to operate most office and personal electronic equipment and some tools including production tools such as hydraulic lifts

• Carrying: Able to carry documents, tools, technical data, electronic equipment up to 30 lbs. / 14 kg.

• Lifting: Able to lift documents, tools, technical data, electronic equipment up to 30 lbs. / 14 kg.

• Pushing / Pulling: Able to push and pull small office furniture and some equipment and tools

• Sitting: Able to sit for long periods of time in meetings, working on computer

• Squatting / Kneeling: Able to squat or kneel to retrieve or replace items stored on low shelving

• Standing: Able to stand for discussions in offices or on production floor

• Travel: Able to travel independently and at short notice

• Walking (include routine walking such as to a shared printer to retrieve documents): Able to walk through office and production areas including uneven surfaces

• Personal Protective Equipment (PPE) required: Required PPE includes, but is not limited to, Safety Shoes, Safety Glasses, Hearing Protection, Respirators/Masks, and/or Protective Gloves as required by site and/or customer site

• Administrative position only PPE required: Steel-toed shoes are required for all production floor visits, appropriate hearing/eye protection may also be required when visiting the production floor.

Citizenship:

• US Citizenship is required

Take your career to a new level and apply online now!

A full job description will be provided to candidates whom progress to the interview stage or any candidate upon request.

This job requires an awareness of any potential compliance risks and a commitment to act with integrity, as the foundation for the Company’s success, reputation and sustainable growth.

Company:

Employment Type:

Experience Level:

Remote Type:

Job Family:

------

Job Posting End Date: 01.12.2025

------

Airbus provides equal opportunities to all individuals seeking assignment with Airbus without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, age, disability, genetics, pregnancy, marital status, veteran status or other legally protected status. In addition to federal law requirements, Airbus complies with applicable state and local laws governing nondiscrimination in every location in which the company has facilities. Airbus expressly prohibits any form of workplace harassment based on race, color, religion, sex, sexual orientation, gender identity, national origin, age, disability, genetics, pregnancy, marital status, veteran status or other legally protected status. This assignment description does not constitute a written or implied contract of employment.

By submitting your CV or application you are consenting to Airbus using and storing information about you for monitoring purposes relating to your application or future employment. This information will only be used by Airbus.
Airbus is committed to achieving workforce diversity and creating an inclusive working environment. We welcome all applications irrespective of social and cultural background, age, gender, disability, sexual orientation or religious belief.

Airbus is, and always has been, committed to equal opportunities for all. As such, we will never ask for any type of monetary exchange in the frame of a recruitment process. Any impersonation of Airbus to do so should be reported to emsom&64;airbus.com.